Brogen 25t Pmsm Electric Drivetrain Ac Motor 120kw 185kw Ev Conversion Kit For Truck

Truck Power Train, Truck Electric Power Train, Truck Motor, Truck

Brogen 25T PMSM electric drivetrain AC motor 120KW 185Kw ev conversion kit for truck

Conversion kits for truck

EV conversion kits

1. electric powertrain

2. battery

3. Electric power steering pump

4. Air brake compressor

5. Auxiliary drive controller

6. Air conditioning compressor

7. Electric drive cooling system

8. Battery thermal management system

Electric Powertrain

Motor

Technical requirements:
1. Product parameters:

Motor rated power: 250 KW;
Peak motor power: 360 KW;
Motor rated torque: 600N.m;
Motor peak torque: 2500N.m
Maximum motor speed: 3500 rpm;
Motor rated speed: 1492 rpm;
Transmission ratio: 8.507/4.943/2.994/1.876/I.2I6/1
Shift mechanism: AMT pneumatic direct shift device;
Power take-off: model QH50, total output speed ratio: 1.67, output torque 50ON.m
2. The motor cooling method is water cooling, the water flow is 35-40L/min, and the water inlet temperature is

≤65℃;

Motor Controller

1. Controller withstand voltage test: 2500AC leakage current ≤10 mA; equivalent 3540DC leakage current ≤1mA
2. Unmarked dimensional tolerances shall be implemented in accordance with GB/T 1804-c;
3. The unmarked shape and position tolerance shall be implemented in accordance with GB/T 1184-k;
4. Water channel volume: 0.29L; water resistance: water temperature 25, flow rate 20L/min, water resistance 55kPa;
5. Cooling method: liquid cooling; cooling requirements:

Battery Packs with BMS

Title goes here.

1.Rated capacity of electric box :228Ah, rated energy :35.24kwh, nominal voltage 154.56V 2.Unmarked dimension tolerance refer to
GB/T 1804-V 3.If no technical requirements are specified, refer to the technical agreement
4.Protection grade of electrical box : IP68
5.Refer to the technical agreement for the barcode box number of the nameplate system
6.The note is pasted correctly without bubbles
7.Keep the surface of the box clean and stored in a dry place without exposure to
sunlight and water
8.The locking torque of the box is 805N.M

Auxiliary Drive products

1. Electric power steering pump

Parameters

Rated Power4 KW
Peak Power10.75 KW
Rated VoltageAC380V
Back EMF (Rated Speed)275V/krpm
Rated Current7.5A
Peak current15A
Rated torque19 N.m
Peak torque38 N.m
Rated Speed1500r/min
Working speed1200 r/min
Controlled flow18±2L/min
Working frequency80 Hz

2. Air brake compressor

Parameters

Rated exhaust380L/min
Motor Power4KW
Rated exhaust pressure1Mpa
Weight65Kg
Exhaust pressure1.2Mpa
Operating temperature -40℃~ +60℃
Dimensions560x335x370 mm
Protection classIP67

3. 3 in 1 controller

Parameters

DCAC Air brake compressorDCAC steering pump

DCDC 12/24V

4. Electric drive cooling system

Parameters

Expansion water tank Cooling line
Electronicwater pump
Radiator + electronic fan assembly

5.Battery thermal management system

Parameters

8kW battery thermal management system

6. Air conditionling compressor

Title goes here.

Parameter
Displacement 34.0 cc/rev
Oil charge 140 cc 1000rpm～
Net weight 6.4 Kg
Oil charge 140 cc 1000rpm～
Speed range 6000rpm
Relief pressure 4.0 MPa(G)
Protection grade IP 67

7. Wiring harness

Harness length can be customized according to customer requirements

8. DC charging station

60/75/120/160/300KW DC charger with CCS1/CCS2

Enclosure Rating IP54

Operating Temperature -20℃~50℃
Altitude <2000m
Relative Humidity 0~95%(No condensation)
Installation Mode Fixed Installation
MTBF ≥8760h
Input Voltage 380±15%V
Input Current <100A
Input Frequency 50/60Hz
Full load power factor >0.99
Output Voltage Range DC 200~750V
Output Voltage Range in Constant Power Mode DC 400~750V
Output current range 5~150A
Ripple Coefficient ≤±0.5%

Company Overview

Beroad Motors mainly focus on automible business. During decades of auto business experiences, Beroad has gained many resources for brand new and used vehicles as well as it's technology and applications.

BELTROAD MOTORS CORPORATION LIMITED is a high-tech enterprise specializing in research and development, production and sales of auto related products, include automobiles, spare parts, equipment and production lines. The company is headquartered in Hon kong. The business involves the export of buses, trucks, passenger cars, special vehicles, new energy vehicles and second-hand vehicles, manufacturing euqipment and tools, spare parts. You are most welcomed to contact us for our fantastic services.